VESA Spacers for Recessed Holes & Curved Monitors

When the VESA Plate Doesn't Fit into the Recess

Your monitor has screw holes, but the mount doesn't lie flat? Our spacers securely bridge housing edges and recesses.

Many monitors (e.g., from MSI, Dell, or LG) have the VESA standard 75x75 or 100x100, but the threaded holes are sunk into a deep depression in the housing. The problem: The mounting plate of your monitor arm is often square and larger than this depression. It hits the casing before it touches the screw holes. Our VESA Spacers solve exactly this geometric problem. They extend the distance between the monitor and the mount, allowing the plate to be installed "floating" in front of the recess.

When Do You Need This Set?

• • Recessed VESA Mount: As described above – the mounting plate is too large for the cutout on the back of the monitor. The spacer sleeves fill this gap.
• • Curved Monitors: On strongly curved screens, a rigid, flat VESA plate often does not sit flush. Spacers compensate for the curvature and prevent stress on the housing.
• • Cable Management: Sometimes ports (HDMI/DisplayPort) are located inconveniently directly behind the VESA plate. A few extra centimeters of distance created by spacers make the sockets accessible again.

Difference to VESA Adapters

It is important to choose the right product. Here is a brief distinction:

What is Included in the Set?

Since the original screws of your monitor will be too short due to the added distance, we supply complete sets. These consist of sturdy spacer sleeves (usually hard plastic or metal) and the matching extra-long screws (typically M4 standard for monitors), so you can start mounting it to your monitor arm immediately.