conectoTV Ceiling Mount 19–43" | VESA 200x200

conectoTV Ceiling Mount 19–43 Inch

The conectoTV ceiling mount is a black, foldable TV mount for TVs and monitors from 19 to 43 inches. It is designed for ceiling installation and can also be used on suitable sloped ceilings.

The mount is designed for displays up to 20 kg and supports VESA patterns up to 200x200 mm. Its foldable design makes it especially useful for setups where a screen needs to be mounted under the ceiling or on a sloped surface in a space-saving way.

For ceiling installation and sloped ceilings

The mount is attached directly to the ceiling. This makes it a suitable solution for rooms where traditional wall mounting is not possible or not desired.

A ceiling mount can also be useful for sloped ceilings if the mounting surface is load-bearing and the screen position works with the room layout.

Before installation, always check whether the ceiling or sloped surface is suitable for the combined weight of the mount and screen. If the structure is unclear, installation should be carried out by a qualified person.

Key product data at a glance

Foldable, swiveling, tilting and height-adjustable

The mount is foldable and allows the screen to be positioned in a space-saving way. This is especially practical if the TV or monitor is only used when needed or should be positioned close to the ceiling.

The swivel and tilt functions allow the screen to be aligned more precisely with the seating position, room layout or sloped ceiling.

The height adjustment provides additional flexibility during installation. Before purchasing, check whether the available height at the installation point is suitable for the planned screen.

VESA up to 200x200 mm

The conectoTV ceiling mount is compatible with common VESA patterns up to 200x200 mm. These include 75x75, 100x100, 100x200, 200x100 and 200x200 mm.

Before purchasing, check the VESA pattern of your TV or monitor. The decisive measurement is the distance between the threaded holes on the back of the device.

• • VESA 75x75: 75 mm horizontally and 75 mm vertically.
• • VESA 100x100: 100 mm horizontally and 100 mm vertically.
• • VESA 200x200: 200 mm horizontally and 200 mm vertically.

For TVs and monitors up to 20 kg

The mount is designed for screens up to 20 kg. The weight should always be checked without the original stand.

In addition to weight, screen size, VESA pattern, housing shape and the position of the ports are also important.

For larger TVs and monitors, also check whether the screen can fold, swivel and tilt freely at the planned installation location.

Installation on a load-bearing surface

A ceiling mount loads the mounting point differently than a traditional wall mount. A stable, load-bearing surface is therefore especially important.

The mount should only be installed on a suitable ceiling or sloped surface. For plasterboard, hollow spaces, suspended ceilings or unknown structures, the load capacity should be checked before installation.

The supplied mounting hardware must be suitable for the respective surface. If the surface differs, different fastening hardware may be required.

Typical use cases

• • Sloped ceilings: When a traditional wall mount is not practical because of the angled surface.
• • Small rooms: When the screen should be mounted in a space-saving way.
• • Workspaces: When a monitor should not stand on the desk.
• • Living areas: When the TV should be aligned flexibly from above.

Scope of delivery

The scope of delivery includes the ceiling mount, mounting hardware and instructions.

Before installation, all parts should be checked and the instructions should be read completely. The fastening method must match the respective surface.

Frequently asked questions about the conectoTV ceiling mount