3IDEE Flexi Pro Monitor Arm 17–40" | up to 11 kg

3IDEE Flexi Pro Monitor Arm 17–40 Inches

The 3IDEE Flexi Pro Monitor Arm is a premium monitor arm for one monitor from 17 to 40 inches. It is designed for monitors weighing 1 to 11 kg and is particularly suitable for large, heavy, or high-end desk setups.

The Flexi Pro combines Design Award 2026, top-side mounting from above, Quick-Release VESA, a fixed rotation stop at the base, and fully concealed cable management. This clearly distinguishes it from simple monitor arms and the slimmer Flexi Lite.

Premium Monitor Arm for Large Monitors

The Flexi Pro is suitable for monitors from 17 to 40 inches. This means it covers not only standard office monitors but also larger screens that can push many standard monitor arms to their limits.

The maximum load capacity is 11 kg. Before purchasing, check the monitor weight, VESA dimensions, housing design, and center of gravity. The monitor weight should be considered without the stand.

Key Product Specifications at a Glance

Design Award 2026 as a Clear Premium Signal

The Design Award 2026 is a key feature of the Flexi Pro. The monitor arm is not only designed for functionality but also for modern workspaces where technology remains visible and should complement the overall setup aesthetically.

The Space Grey finish, concealed cable management, and clean design make the Flexi Pro particularly appealing for high-end home office, office, and creator setups.

Top-Side Mounting from Above

One important advantage of the Flexi Pro is its top-side mounting from above. The mount is not conventionally and awkwardly screwed to the desk from underneath; instead, it is installed from above.

This is particularly convenient when there is limited space underneath the desk or when the mounting point is difficult to reach from the underside. Both the C-clamp and grommet mounting are designed for this mounting method.

Fixed Rotation Stop at the Base

The fixed rotation stop at the base limits the movement of the arm in the lower section. This prevents the monitor arm from swinging backward uncontrollably into a wall or other objects.

This is particularly useful when the desk is positioned close to a wall or when there is limited space behind the monitor. The rotation stop provides greater control during everyday use.

250 mm Spring Travel and 600 mm Extension

The Flexi Pro provides 250 mm of spring travel. This allows the monitor height to be adjusted and positioned according to your preferred working position.

The maximum extension is 600 mm. This allows the monitor to be pulled closer, pushed farther back, or positioned to the side. This is particularly helpful with large monitors or deeper desks.

Tilt, Swivel, and 360° Rotation

The monitor can be tilted by +90° / -90° and swiveled by +90° / -90°. In addition, 360° rotation is possible.

This allows the screen to be flexibly adjusted to suit different tasks. A suitable monitor can be used in landscape or portrait orientation.

Quick-Release VESA for Easier Installation

The Flexi Pro features a removable Quick-Release VESA plate. The plate is first attached to the monitor and then connected to the monitor arm.

This makes installation significantly easier, especially with larger monitors. The common VESA dimensions 75x75 mm and 100x100 mm are supported.

• • VESA 75x75: Hole spacing of 75 mm horizontally and 75 mm vertically.
• • VESA 100x100: Hole spacing of 100 mm horizontally and 100 mm vertically.
• • Important: Monitor size, weight, VESA dimensions, and housing design must be compatible with the mount.

Fully Concealed Cable Management

The cable management on the Flexi Pro is fully concealed. Power and signal cables can be neatly routed inside the arm.

This creates a much cleaner-looking workspace. Especially with a visible premium monitor arm, neat cable management is an important aesthetic advantage.

3IDEE Own Brand with Direct Support

The Flexi Pro is a product of the 3IDEE own brand. This means you receive direct support from 3IDEE, including assistance with questions about installation, compatibility, or replacement parts.

Especially with high-quality monitor arms, accessible support is helpful because desk thicknesses, monitor models, VESA mounts, and mounting points can vary considerably.

When the Monitor Does Not Fit Directly

Not every monitor can be mounted directly to a VESA mount. Some monitors do not have a VESA mount, have a recessed rear panel, or use a hole pattern that does not directly match the mount.

• • No VESA mount on the monitor: Suitable solutions can be found under VESA Adapters.
• • VESA plate does not sit flush: VESA Spacers are suitable for this.
• • Hole pattern does not match: VESA Adapter Plates can help with non-standard VESA dimensions.

Frequently Asked Questions About the 3IDEE Flexi Pro Monitor Arm