BONTEC Gas Spring Monitor Arm 13–32" | 3–9 kg

BONTEC Gas Spring Monitor Arm 13–32 Inches

The BONTEC Gas spring monitor arm is a height-adjustable desk mount for one monitor from 13 to 32 inches. The gas spring supports height adjustment over a range of 450 mm and is designed for monitors weighing 3 to 9 kg to

The mount is suitable for monitors with VESA 75x75 mm or VESA 100x100 mm. It can be mounted either with a C-clamp or using the Through-desk mounting mounting method.

Which setups is this gas spring monitor arm suitable for?

The BONTEC gas spring monitor arm is suitable for desk setups with one monitor. It replaces the original monitor stand and frees up more desk space. Thanks to the gas spring, the screen can be adjusted more easily to different seating positions or working styles.

The mount is suitable for office, home office, gaming, and workstations where the monitor is not only adjusted once, but is moved or repositioned regularly.

Key product specifications at a glance

Gas spring height adjustment for monitors from 3 to 9 kg

The integrated gas spring supports the height adjustment of the monitor. It is adjusted to the weight of the mounted screen. The suitable weight range is 3 to 9 kg.

When the gas spring is correctly adjusted, the monitor remains in the desired position and can be moved more easily in height. This is especially useful when the screen needs to be adjusted regularly depending on the working position.

450 mm height adjustment range and 540 mm reach

The monitor arm offers a height adjustment range of 450 mm. This allows the screen to be adjusted to the seating position and desired eye level.

The maximum reach is 540 mm. This allows the monitor to be pulled closer, pushed farther back, or positioned to the side.

Tilt, swivel, and 360° rotation

The monitor can be tilted by +90° / -90° and swiveled by +90° / -90°. In addition, 360° rotation is possible.

This allows the screen to be used in either landscape or portrait orientation depending on the application. This is helpful for office applications, programming, document editing, or flexible home office setups.

C-clamp or Through-desk mounting

The BONTEC gas spring monitor arm can be mounted to the desk edge using a C-clamp. This mounting method is suitable for desk surfaces with a thickness of 10 to 90 mm.

Alternatively, Through-desk mounting is possible. The mount is suitable for desk surfaces from 10 to 70 mm thick. The required hole diameter is 10 to 60 mm.

Both mounting methods are included. Before purchasing, check the desk thickness, desk edge, existing hole, and available space underneath the desk surface.

Check VESA 75x75 and 100x100

The monitor arm is suitable for monitors with VESA 75x75 mm or VESA 100x100 mm mounting patterns. The detachable VESA plate makes installation easier because it can first be attached to the monitor and then hooked onto the arm.

• • VESA 75x75: Hole spacing 75 mm horizontally and 75 mm vertically.
• • VESA 100x100: Hole spacing 100 mm horizontally and 100 mm vertically.
• • Important: The monitor weight, VESA dimensions, and housing shape must be compatible with the mount.

Concealed cable management for an orderly workspace

The mount features concealed cable management. Power and signal cables can be routed along the monitor arm to keep the workspace tidier.

This is especially practical when the monitor arm is visibly mounted on the desk or when multiple cables run to the monitor.

If the monitor does not fit directly

Not every monitor can be attached directly to a VESA mount. Some monitors have no VESA mounting points, a recessed rear panel, or a hole pattern that does not directly match the mounting plate.

• • No VESA on the monitor: You can find suitable solutions under VESA Adapters.
• • VESA plate does not sit flush: Suitable options include VESA Spacers.
• • Hole pattern does not match: For different VESA dimensions, use VESA Adapter Plates.

Frequently asked questions about the BONTEC gas spring monitor arm