Invision Vortex VR200 RGB Monitor Arm 27–57" | up to 18 kg

Invision Vortex VR200 RGB Monitor Arm 27–57 Inches

The Invision Vortex VR200 RGB Monitor Arm is a heavy-duty desk mount for large curved and ultrawide monitors from 27 to 57 inches. The adjustable spring is designed for monitors weighing 3 to 18 kg.

The monitor arm combines a sturdy construction made of alloy steel with integrated RGB lighting. The lighting offers 14 modes, distributed across three zones on the base, lower arm and upper arm. This makes the VR200 particularly suitable for gaming setups, ultrawide workstations and large curved monitors.

For large curved and ultrawide monitors

The Vortex VR200 is designed for monitors from 27 to 57 inches. This makes the monitor arm particularly suitable for users with large gaming, curved and ultrawide monitors.

The load capacity is 3 to 18 kg. The monitor weight should be checked without the original stand. With very large curved monitors, depth, center of gravity and VESA position are also important.

Key product specifications at a glance

RGB lighting with 14 modes

The integrated RGB lighting makes the Invision Vortex VR200 particularly interesting for gaming setups. The lighting offers 14 modes and is distributed across three areas: the base, lower arm and upper arm.

Power is supplied via 5V USB. The controls are located on the base; no remote control is included. The RGB lighting can be switched off when not required.

Heavy-duty load capacity up to 18 kg

The VR200 is designed for monitors weighing 3 to 18 kg. This makes it suitable for large curved and ultrawide monitors that may be too heavy or large for many standard monitor arms.

With large monitors, weight is not the only factor that matters. Monitor depth, center of gravity, VESA position and the shape of the rear housing are also important.

260 mm height adjustment and 490 mm reach

The monitor arm provides 260 mm of height adjustment. The maximum height from the desk surface to the VESA center is approximately 400 mm.

The maximum reach is 490 mm. This allows the monitor to be pulled closer, pushed further back or positioned to the side.

Tilt, swivel and 360° rotation

The monitor can be tilted by +50° / -50° and swiveled by +90° / -90°. It can also be rotated 360°.

This allows the screen to be adjusted to the seating position, viewing angle and overall setup. A compatible monitor can also be used in portrait orientation.

C-clamp or grommet mounting

The C-clamp mounting option is suitable for desk tops with a thickness of 15 to 90 mm.

Alternatively, a grommet mount can be used. This is suitable for desk tops up to 90 mm thick. Both mounting options are included in the package.

Before purchasing, check the desk thickness, desk edge, existing grommet hole and available space underneath the desk.

VESA 75x75 and 100x100 with Quick Release

The Invision Vortex VR200 is suitable for monitors with VESA 75x75 mm or VESA 100x100 mm mounting patterns. The VESA plate is removable, making monitor installation easier.

• • VESA 75x75: Hole spacing of 75 mm horizontally and 75 mm vertically.
• • VESA 100x100: Hole spacing of 100 mm horizontally and 100 mm vertically.
• • Important: Monitor size, weight, VESA dimensions, housing shape and center of gravity must be compatible with the mount.

Cable management with long clips

Cable management is provided by integrated long clips at the top and bottom of the monitor arm. Power, signal and USB cables can therefore be routed more neatly along the arm.

This is particularly useful for large gaming setups where multiple cables from the monitor and RGB lighting need to be kept organized.

Matte black alloy steel finish

The Vortex VR200 is made from alloy steel and features a matte black finish. The construction is designed for large and heavy monitors.

The black appearance works well with gaming monitors, dark desk frames and setups where the monitor arm remains a visible part of the workspace.

Package contents

The package includes the Invision Vortex VR200 monitor arm, C-clamp, grommet mount, tools, screws and manual.

A separate manufacturer's warranty is not specified for this product.

If the monitor does not fit directly

Not every monitor can be mounted directly to a VESA mount. Some monitors do not have a VESA mounting interface, have a recessed rear panel or use a mounting pattern that does not directly match the mount.

• • No VESA mounting on the monitor: Suitable solutions can be found under VESA Adapters.
• • VESA plate does not sit flush: VESA Spacers are suitable for this.
• • Mounting pattern does not fit: For different VESA dimensions, VESA Adapter Plates can help.

Frequently asked questions about the Invision Vortex VR200 RGB Monitor Arm